Dallaire II Wood Fireplace by Valcourt

The Dallaire II wood-burning fireplace embodies the essence of comfort and sophistication. Every detail has been carefully crafted to deliver an unparalleled experience, where ease of use and exceptional design elevate the simple pleasure of enjoying a wood fire.

A true market exclusive, the Dallaire II stands apart with its innovative retractable cast iron doors, which slide discreetly to either side of the combustion chamber. This thoughtful design frees the space in front of the unit, offering an unobstructed, panoramic view of the flames.

Versatile and powerful, the Dallaire II efficiently heats spaces up to 2,500 sq. ft., all while creating a warm, inviting ambiance. With the doors closed, it ensures efficient, long-lasting combustion. With the doors open—paired with the optional firescreen (AC01226)—it delivers the authentic charm of an open wood fire, safely. To further personalize your fireplace, five louvre styles are available to complement its faceplate.

Proudly made in Canada, the Dallaire II reflects Valcourt’s commitment to uncompromising quality. Choosing Valcourt means choosing meticulous craftsmanship, premium materials, robust construction, and long-lasting durability built on undeniable expertise.

New Option – NightFlame Ceramic Glass
The ROBAX® NightFlame ceramic glass panels maintain a refined appearance at all times. This innovative glass technology transforms its look when the fire goes out, concealing the interior of the fireplace when not in use, while offering a crystal-clear view of the flames when burning.

Discover the fireplace of your dreams with the Dallaire II – the perfect balance of refinement and comfort.

Appliance performance ⁽¹⁾

⁽¹⁾ Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

⁽⁾ Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.

⁽²⁾ The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

⁽³⁾ As measured per CSA B415.1-10 stack loss method.

⁽⁴⁾ Higher Heating Value of the fuel.

⁽⁵⁾ Lower Heating Value of the fuel.

⁽⁶⁾ Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

⁽⁷⁾ Optimum overall efficiency at a specific burn rate (LHV).

⁽⁸⁾ The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.

⁽⁹⁾ This appliance is officially tested and certified by an independent agency.

⁽¹⁰⁾ Carbon monoxyde.

General features