Horizon Wood Fireplace by Osburn

Beyond the Size!

The Osburn Horizon wood fireplace combines power, energy efficiency, and clean combustion to offer peace of mind and unmatched comfort. Its sleek and timeless design blends seamlessly into any décor, while delivering an exceptional heating experience.

Behind its wide glass door lies a spacious 4.28 ft³ firebox, capable of holding up to 60 lbs of wood, making it one of the largest in its category.

Thanks to its patented intelligent air control mechanism, the Horizon ensures optimal combustion while keeping emissions as low as 1.6 g/h, meeting the EPA’s strict clean-air standards.

Built for performance, this high-efficiency fireplace can heat expansive living spaces and deliver up to 11 hours of burn time, making it the ultimate choice for long, cozy winter nights.

🔥 New Option – NightFlame Ceramic Glass
The ROBAX® NightFlame ceramic glass panels add elegance in every situation. When the fire is out, the glass conceals the interior of the fireplace; when it’s burning, it offers a crystal-clear panoramic view of the flames.

With the Osburn Horizon, enjoy long-lasting warmth, outstanding efficiency, and refined design — all in one impressive fireplace.

Appliance performance ⁽¹⁾

⁽¹⁾ Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

⁽⁾ Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.

⁽²⁾ The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

⁽³⁾ As measured per CSA B415.1-10 stack loss method.

⁽⁴⁾ Higher Heating Value of the fuel.

⁽⁵⁾ Lower Heating Value of the fuel.

⁽⁶⁾ Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

⁽⁷⁾ Optimum overall efficiency at a specific burn rate (LHV).

⁽⁸⁾ The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.

⁽⁹⁾ This appliance is officially tested and certified by an independent agency.

⁽¹⁰⁾ Carbon monoxyde.

General features