Mundo II Wood Fireplace by Valcourt

Protected by an industrial design patent, the Mundo II redefines the very essence of wood heating. With its sleek lines, neutral tones, and refined silhouette, it perfectly balances modern design, functionality, comfort, and safety. Environmentally conscious, this non-catalytic fireplace is EPA certified, boasting an impressively low particle emission rate.

The air gravity kit, available as an option, lets you fully harness the Mundo II’s heating power while preserving the clean, contemporary lines of your space. For maximum performance, a forced air kit can be added to efficiently distribute warmth to rooms located farther from the fireplace.

New Feature – NightFlame Ceramic Glass
The ROBAX® NightFlame ceramic glass panels maintain an elegant appearance at all times, transforming their look when the fire is out. This innovative technology conceals the fireplace’s interior when not in use, while offering a crystal-clear view of the flames when lit.

Appliance performance 

⁽¹⁾ Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

⁽⁾ Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.

⁽²⁾ The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

⁽³⁾ As measured per CSA B415.1-10 stack loss method.

⁽⁴⁾ Higher Heating Value of the fuel.

⁽⁵⁾ Lower Heating Value of the fuel.

⁽⁶⁾ Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

⁽⁷⁾ Optimum overall efficiency at a specific burn rate (LHV).

⁽⁸⁾ The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.

⁽⁹⁾ This appliance is officially tested and certified by an independent agency.

⁽¹⁰⁾ Carbon monoxyde.

General features