Outfitter II Pellet Stove by Quadra-Fire

Enjoy peace of mind with reliable, efficient warmth and lower fuel bills. The Outfitter II is built for long continuous burns with a 130-lb. hopper—twice the size of most stoves. And it’s easy to set your comfort level with the dial control or wall thermostat. There’s no better choice to replace your old pellet stove or switch from wood to pellets, and “live green” by burning a renewable, clean-burning fuel.

• Heat large spaces of up to 2,300 square feet depending on climate and home efficiency
• Load less often with the 130-pound hopper capacity
• Control with ease using the color dial control and wall thermostat
• Use less fuel with Higher Heating Value (HHV) efficiency of 82 percent
• EPA-certified and Federal Biomass Tax Credit-qualified

¹ Appliance Depth includes entire unit including depth of firebox and extension onto hearth.

² BTU/hr Input based on maximum feed rate per hour multiplied by approximately 8600 BTU, which is average BTU from a pound of pellets.

³ This is a general guide, see your local dealer for help in determining the product that best suits your heating needs based on climate, home efficiency, location of the heater, and air movement in the room.

⁵ Weighted average LHV (Low Heating Value) & HHV (High Heating Value) efficiencies using data collected during EPA emissions test. HHV efficiency over 75% qualifies for the Federal Tax Credit.

Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the owner’s manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owner’s/installation manual.

*For select products: Heating capacity to be used as a guide only. See your local dealer for help in determining the product that best suits your heating needs based on climate and home efficiency.